Metacote Coastal
Metacote Coastal is formulated for the coastal region.
It is a multipurpose gypsum based skimming plaster used to skim various surfaces to give a smooth continuous look.
Metacote is suitable for providing a highly polished smooth surface, a brush finish or a textured finish. Should be used neat with the addition of clean water only.
PRODUCT DESCRIPTION
METACOTE COASTAL is a formulated and retarded
gypsum hemihydrate finishing plaster.
Multipurpose plaster
METACOTE COASTAL complies to the Standard DIN EN 13279-1 Category C6
PURITY
CaSO40.5H2O – 90 %
Additives – 10 %
PHYSICAL PROPERTIES
Colour: Off white 85 – 95 % whiteness scale
Dry pack density: 0.6 – 0.8
pH: 7 – 10
Dry set density: 1.45
Coverage of 40 kg: 25m2 for 3mm thick OR 11.5m2 for 5 – 6mm thick
Compressive strength: 2 – 4 N/mm2 (DIN EN 13279-2)
Flexural strength: 2.5-3.5 N/ nm2 (DIN EN 13279-2)
Bound Moisture: 5 – 7%
Pot life of mixed plaster: 40 – 70 minutes
Initial set: Cement needle test 65 – 90 minutes (DIN EN 13279-2)
Open time 20 – 30 minutes
Final set: Cement needle test 75 – 130 minutes (DIN EN 13279-2)
Typical drying time on board 24 – 48 hours (Weather Dependent)
MIXING INSTRUCTIONS
Water / Plaster ratio: 0.55 – 0.65
Add 40 kg METACOTE COASTAL to 22 – 26 litres of water
Allow to soak for 5 minutes
Mix until lump-free to a smooth paste
APPLICATION DETAILS
Water / powder: 55 – 65 ml water /100 g plaster
Application surfaces:
• Apply to clean surface
• Sprinkle water onto the surface
• Apply METACOTE COASTAL onto the surface with a steel trowel
• After 20 – 30 minutes, level with steel trowel
• After 45 – 55 minutes, wet float with carpet or rubber faced float
• After 60 – 70 minutes, final finishing to smooth surface by scraping with steel trowel• Do not mix
more METACOTE COASTAL than you can use in 60 minutes.
• Do not apply less than 3mm thick.
• Application can vary between 3 – 75mm in multiple coats
CLEANING:
Clean all tools thoroughly with water before mixing the next batch
PACKAGING
40 kg bags.
10 kg buckets
STORAGE
Store in a cool dry place away from direct sun and humidity.
This Product is Manufactured by OMV (PTY) LTD. The products exceptional performance
Contact our Sales Team
SITE LINKS
REPORT HOTLINE
Raubex Group Fraud Line
Tel: 0800 20 53 14
Fax: 0800 00 77 88
www.tip-offs.com
Postal Address: 138, Umhlanga Rocks, KZN, 4320